If you have a brand of valve, for example, Grohe, Hansgrohe, Steinberg, Kludi Hansa owns or knows mostly why. You know it too? But taps are not the same valves - unfortunately this is not seen from the outside: The devil is in the detail!
So you could, for example, when the raw materials costs a lot of money without the customer noticed the same. How robust appurtenance is, you can see it now time not to! Brand manufacturers are therefore almost entirely on brass - and sometimes even on stainless steel. Brass fittings are extremely robust and it is hardly pollutants (nickel, lead) to the water itself and tends to not damage the chrome to rust.
Chrome shines - how long, is to decide on the quality of the plating! The thickness of the chromium layer and diligence in deciding the surface finishing on the lasting quality. In addition to the scratch resistance and the gloss has thus created the surface, however, other practical advantages: In order to smooth the surface to make it explicit that no water (along with dirt and lime) plant can be intensely polished fittings and finally sealed. The difference between a cheap and of high quality chrome plating can not see, but after some time you notice it when cleaning. And because of the chromium is not dull or flaking!
Dripping taps because calcified end seals in the valves? That is over. Durable maintenance-free valves are today but for high-tech materials! Slices from an extremely hard and smooth ceramic control the flow of water today. Insensitive to do such calcification valves for many years in service and are always smooth and even maintenance.
Who set up a bathroom, but needs not only for the bath taps or the sink, but also accessories, brand manufacturers offer a rich, to the respective valve fitting range. Roll your bathroom components from different manufacturers, is the coziness so quickly. Coziness comes only when your bathroom with the same diligence as to set up your living room!
Brand products are not only quality but also for service, also founded the reputation of the brand. Brand manufacturers spare parts for years, and many (especially German) providers in the case of warranty repair on site - at your home! Cheap replace defective valve manufacturer in the warranty period, mostly because repairs are not worth it. That means, however: The faulty valve must be developed and later installed. The result may be a thick (even to paying!) Bill from a plumber, because not everyone is hobby craftsmen! And what about after the warranty period, with spare parts from? Blöd when the valve because of a beautiful little thing must be thrown away ....
Labels:
Home |
|
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment